Expert Ford F-150 Power Window Repair in Houston by TLC Auto Glass

Cars are mechanical machines with parts that might wear or break down. So, all vehicle’s owners have to have regular maintenance for their cars such as oil changes, air filter changes, adding fluids like antifreeze, oil, and washer fluid, maintaining tire pressure, and using the right tires for the environment. 

Owners should know about the different systems their particular cars have, including the type of drivetrain, the braking system, as well as the vehicle’s year, make, and model. For instance, understanding your Ford F-150 power window system can help you detect issues early on. They must also learn the meaning of the various warning lights for their cars and detect signs of problems when they arise, including sounds, vibrations, or other indicators.

At TLC Auto Glass, we are committed to providing our clients with the top-quality Power window Replacement in Katy, TX  and Ensure your Ford F-150 power window operates smoothly, Call us now to get our best service and discounted offers (713)686111 

Step-by-Step Guide to Repairing Ford F-150 Power Windows 

The following represents a step-by-step guide for repairing your Ford F-150 power window to save your time and money;  

1. Prepare the truck

This is achieved by disconnecting the battery or removing the fuse that controls the window motors, and making sure to secure the window in position while changing the motor.

2. Remove trim panels

These steps are dependent on truck year and trim level, so some may not apply or will vary slightly:

1. Wrap the end of the flat head with an electrical tape to prevent it from scratching the door trim.
2. Remove the upper pillar trim on the door then pull back to un-clip itself.
3. Pull the door handle, and pry up the plastic square behind it 
4. Remove the 8mm bolt.
5. Remove the two bolts on the bottom of the door panel
6. Remove the door handle by unclipping it from the door panel on the rear side, then slide it through the panel.
7. Un-clip any wiring harnesses from the switch panel.
8. Slide the door panel up and pull it off, but still support it.
9. Make sure nothing is attaching the door panel to the truck

3. Remove Window Motor

1. Locate the 2-3 dimples in the upper corner towards the mirror.
2. Drill a pilot hole in the center of each dimple.
3. Using your hole saw, drill a hole big enough to fit an 8mm socket through. 
4. Using the telescoping magnet, remove any metal shavings 
5. Remove the three 8mm bolts holding the motor in place.
6. Un-clip the wiring harness from the motor.
7. Grab the back of the motor, rotate it clockwise towards the door lock.
8. Once the gears release, pull it towards the outside door skin then remove it.

4. Re-install

1. Install is the reverse procedure of the above steps:
2. Line up the motor and then rotate counter-clockwise to lock into place.
3. Re-install the three 8mm bolts.
4. Re-install door panel following the panel removal procedure in reverse, 
5. Re-install the upper a-pillar trim.
6. Reconnect the battery or the fuse.

Tools and Materials Needed for Ford F-150 Power Window Replacement

This process is not as simple as expected. Though, if you have patience and you know the needed tools to enable you to do the replacement yourself, this will save you a lot of time and effort. Materials for this process are; 

• New window motor(s)
• Thin flat head screwdriver with some electrical tape around the head
• 5/8” to 3/4” hole saw or drill bits and a pilot hole drill bit
• Socket set and a socket extension
• Magnetic telescoping pole 
• Packing tape

Check Also : Ford Windshield Replacement in Texas: Your Local Solution

Tips for Troubleshooting Ford F-150 Power Window Problems 

When electric window problems exist in Ford F-150 Power Window, there are few things that you may check on your own till you get directed to a professional help. These are; 

1. Check the power window electrical fuses
2. Find out if all power windows are defective
3. Check if the window has any physical issues
4. Look up if the window works when ignition is engaged

Ford Mechanic for Personalized Help

Seeking the help of expert mechanics is sometimes mandatory in order to fix your power window. In TLC Auto Glass, we have a bunch of certified mechanics who can help you out anytime and anywhere. Below are the most important characteristics of a tie saving and cost-effective service at a Ford Auto shop;

1. Chat with a Ford Mechanic 1:1
2. 24/7 roadside assistance
3. Save thousands on auto parts & service
4. Global travel assistance
5. Cancel anytime.

How do you fix a Ford window that won’t roll up?

Turn the car on, press the switch down in the desired direction and make sure to keep the button depressed while completing the other steps. Finally, slam the car door and repeat if it didn’t work out on the first try.

Can the power window regulator be repaired?

Power windows in modern cars, they roll up or down using a touch button. However, the motor may wear or break over time. In such a case, they can be either repaired or sometimes replaced if the damage is severe. 

How do I force a power window up?

If slamming doesn’t help, strike the center of the door in order to put the window back into track, so the motor can roll it up while keeping the switch up. 

Ensure your Ford F-150 power window operates smoothly by regularly inspecting the mechanisms, keeping the tracks clean, and promptly addressing issues with professional maintenance. At TLC Auto Glass, we save car owners time and money on diagnosing and repairing Ford F-150 power window damages. Expert care ensures your Ford’s longevity and performance. If you’re due for routine maintenance or repairs, contact TLC Auto Glass at (713) 686-1111. Enjoy added value, save time, and have peace of mind knowing you’re safe on the road with our dedicated service.